Connection technology |
PUSH WIRE® |
Actuation type |
Push-in |
Connectable conductor materials |
Copper
Aluminum |
Anschließbare Leiterwerkstoffe Hinweis |
WAGO spring clamp terminal blocks are suitable for solid aluminum conductors up to 4 mm²/12 AWG if WAGO “Alu-Plus” Contact Paste is used for termination. “Alu-Plus” Contact Paste Advantages:
- Automatically destroys the oxide film during clamping.
- Prevents fresh oxidation at the clamping point.
- Prevents electrolytic corrosion between aluminum and copper conductors (in the same terminal block).
- Provides long-term protection against corrosion.
For spring clamp connections with PUSH WIRE® connection technology, WAGO recommends that the aluminum conductor first be cleaned and then immediately inserted into the clamping unit filled with “Alu-Plus” contact paste. It is also possible to apply WAGO “Alu-Plus” additionally on the whole surface of the aluminum conductor before termination. Please note that the nominal currents must be adapted to the reduced conductivity of the aluminum conductors:: 2.5 mm² = 16 A 4 mm² = 22 A |
Solid conductor |
0,5 … 2,5 mm² / 20 … 16 AWG |
Strip length |
11 mm / 0.43 inch |
Total number of connection points |
4 |
Total number of potentials |
1 |
Wiring type |
Side-entry wiring |
Scrie un review
Review-ul a fost trimis cu succes.