Wago Clema sir Wago de trecere cu 2 conductori; 4mm²,gri ,TOPJOB 2204-1201

nou
5,29 Lei

Regletă de trecere cu 2 conductori; cu buton cu reţinere, 4 mm² cu port test, marcare laterală şi centru, pentru şină DIN 35 x 15 şi 35 x 7,5   CAGE CLAMP® înclichetare, 4,00 mm²  gri

In stoc

Durata de livrare: 2-15 zile lucratoare

Transport 24.5 Lei
Limita stoc
Adauga in cos
Cod Produs: 2204-1201 Ai nevoie de ajutor? 0773393640
Adauga la Favorite Cere informatii
  • Descriere
  • Review-uri (0)
Link Producator
https://www.wago.com/ro/rail-mount-terminal-blocks/2-conductor-through-terminal-block/p/2204-1201
   

Electrical data
Ratings per IEC/EN
Ratings per IEC/EN 60947-7-1
Nominal voltage (III/3) 800V
Rated impulse voltage (III/3) 8kV
Rated current 32A
Legend (ratings) (III / 3) ≙ Overvoltage category III / Pollution degree 3

Ratings per IEC/EN 2
Rated current 2 41A

Ratings per UL
Approvals per UL 1059
Rated voltage UL (Use Group B) 600V
Rated current UL (Use Group B) 30A
Rated voltage UL (Use Group C) 600V
Rated current UL (Use Group C) 30A

Ratings per CSA
Approvals per CSA 22.2 No 158
Rated voltage CSA (Use Group B) 600V
Rated current CSA (Use Group B) 30A
Rated voltage CSA (Use Group C) 600V
Rated current CSA (Use Group C) 30A

Ex information
Reference hazardous areas See Downloads – Documentation – Additional Information: Technical Section; Technical explanations
Ratings per ATEX: PTB 18 ATEX 1006 U / IECEx: PTB 18.0013U (Ex eb IIC Gb)
Rated voltage EN (Ex e II) 550V
Rated current (Ex e II) 31A
Rated current (Ex e II) with jumper 30A

Power loss
Power loss, per pole (potential) 1,024W
Rated current IN for specified power loss 32A
Resistance value for specified, current-dependent power loss 0,001Ω

Connection data
Connection points 2
Total number of potentials 1
Number of levels 1
Number of jumper slots 2

Connection 1
Connection technology Push-in CAGE CLAMP®
Actuation type Push-button
Connectable conductor materials Copper
Nominal cross-section 4 mm²
Solid conductor 0,5 … 6 mm² / 20 … 10 AWG
Solid conductor; push-in termination 1 … 6 mm² / 14 … 10 AWG
Fine-stranded conductor 0,5 … 6 mm² / 20 … 10 AWG
Fine-stranded conductor; with insulated ferrule 0,5 … 4 mm² / 20 … 12 AWG
Fine-stranded conductor; with ferrule; push-in termination 1,5 … 4 mm² / 18 … 12 AWG
Note (conductor cross-section) Depending on the conductor characteristic, a conductor with a smaller cross-section can also be inserted via push-in termination.
Strip length 11 … 13 mm / 0.43 … 0.51 inci
Wiring direction Front-entry wiring

Physical data
Width 6,2 mm / 0.244 inci
Height 52,3 mm / 2.059 inci
Depth from upper-edge of DIN-rail 32,9 mm / 1.295 inci

Mechanical Data
Mounting type DIN-35 rail
Marking level Center/side marking

Material Data
Note (material data) Information on material data can be found here
Color gri
Material group I
Insulation material Polyamide (PA66)
Flammability class per UL94 V0
Fire load 0,135MJ
Weight 7,1g

Environmental requirements
Processing temperature -35 … +85 °C
Continuous operating temperature -60 … +105 °C

Commercial data
eCl@ss 10.0 27-14-11-20
eCl@ss 9.0 27-14-11-20
ETIM 8.0 EC000897
ETIM 7.0 EC000897
PU (SPU) 50 Buc.
Packaging type box
Country of origin DE
GTIN 4055143711494
Customs tariff number 85369010000
 


 
Daca doresti sa iti exprimi parerea despre acest produs poti adauga un review.

Scrie un review


Review-ul a fost trimis cu succes.

Trimite

Suport clienti 08.30-16.30

0773393640 comenzi@electricon.ro

Compara produse

Trebuie sa mai adaugi cel putin un produs pentru a compara produse.

A fost adaugat la favorite!

A fost sters din favorite!