Wago Clema sir Wago de trecere cu 2 conductori; 1,5mm²,gri ,TOPJOB 2201-1201

3,50 Lei

Regletă de trecere cu 2 conductori; cu buton cu reţinere; 1,5 mm²; cu port test; potrivit pentru aplicaţii Ex e II; marcare laterală şi centru; pentru şină DIN 35 x 15 şi 35 x 7,5; CAGE CLAMP® înclichetare; 1,00 mm²; gri

In stoc

Durata de livrare: 2-15 zile lucratoare

Transport 24.5 Lei
Limita stoc
Adauga in cos
Cod Produs: 2201-1201 Ai nevoie de ajutor? 0773393640
Adauga la Favorite Cere informatii
  • Descriere
  • Review-uri (0)
Link Producator
https://www.wago.com/ro/rail-mount-terminal-blocks/2-conductor-through-terminal-block/p/2201-1201_000-053

Electrical data
Ratings per IEC/EN
Ratings per IEC/EN 60947-7-1
Nominal voltage (III/3) 800V
Rated impulse voltage (III/3) 8kV
Rated current 18A
Legend (ratings) (III / 3) ≙ Overvoltage category III / Pollution degree 3

Ratings per IEC/EN 2
Rated current 2 24A

Ratings per UL
Approvals per UL 1059
Rated voltage UL (Use Group B) 600V
Rated current UL (Use Group B) 15A
Rated voltage UL (Use Group C) 600V
Rated current UL (Use Group C) 15A

Ratings per CSA
Approvals per CSA 22.2 No 158
Rated voltage CSA (Use Group B) 600V
Rated current CSA (Use Group B) 15A
Rated voltage CSA (Use Group C) 600V
Rated current CSA (Use Group C) 15A

Ex information
Ratings per ATEX: PTB 18 ATEX 1004 U / IECEx: PTB 18.0011U (Ex eb IIC Gb)
Rated voltage EN (Ex e II) 550V
Rated current (Ex e II) 17,5A

Power loss
Power loss, per pole (potential) 0,771W
Rated current IN for specified power loss 18A
Resistance value for specified, current-dependent power loss 0,002Ω

Connection data
Connection points 2
Total number of potentials 1
Number of levels 1
Number of jumper slots 2

Connection 1
Connection technology Push-in CAGE CLAMP®
Actuation type Push-button
Connectable conductor materials Copper
Nominal cross-section 1,5 mm²
Solid conductor 0,25 … 2,5 mm² / 22 … 14 AWG
Solid conductor; push-in termination 0,75 … 2,5 mm² / 18 … 14 AWG
Fine-stranded conductor 0,25 … 2,5 mm² / 22 … 14 AWG
Fine-stranded conductor; with insulated ferrule 0,25 … 1,5 mm² / 22 … 16 AWG
Fine-stranded conductor; with ferrule; push-in termination 0,75 … 1,5 mm² / 18 … 16 AWG
Note (conductor cross-section) Depending on the conductor characteristic, a conductor with a smaller cross-section can also be inserted via push-in termination.
Strip length 9 … 11 mm / 0.35 … 0.43 inci
Wiring direction Front-entry wiring

Physical data
Width 4,2 mm / 0.165 inci
Height 48,5 mm / 1.909 inci
Depth from upper-edge of DIN-rail 32,9 mm / 1.295 inci

Mechanical Data
Mounting type DIN-35 rail
Marking level Center/side marking

Material Data
Note (material data) Information on material data can be found here
Color gri-galben închis
Material group I
Insulation material Polyamide (PA66)
Flammability class per UL94 V0
Fire load 0,089MJ
Weight 4,1g

Environmental requirements
Processing temperature -35 … +85 °C
Continuous operating temperature -60 … +105 °C

Commercial data
ETIM 8.0 EC000897
PU (SPU) 100 Buc.
GTIN 4066966257342
 
Daca doresti sa iti exprimi parerea despre acest produs poti adauga un review.

Scrie un review


Review-ul a fost trimis cu succes.

Trimite

Suport clienti 08.30-16.30

0773393640 comenzi@electricon.ro

Compara produse

Trebuie sa mai adaugi cel putin un produs pentru a compara produse.

A fost adaugat la favorite!

A fost sters din favorite!