Sunt 2 cai izolat gri deschis pentru cleme 2000/2102/2202 - Electricon.ro
Produsele din stoc ELECTRICON, se livrează în 24-48 ore

Wago Sunt 2 cai izolat gri deschis pentru cleme 2000/2102/2202

-5% nou
2,15 Lei 2,04 Lei
Economisesti: 0,11 Lei
TVA inclus
2002-400

Zile de livrare: Luni - Vineri

38 In stoc

Data estimata de livrare: poimaine, 10.11.2024

Limita stoc
Adauga in cos
Cod Produs: 2002-400 Ai nevoie de ajutor? 0773393640 / 0772245110
Adauga la Favorite Cere informatii
  • Descriere
  • Review-uri (0)
Link producator
https://www.wago.com/ro/rail-mount-terminal-blocks/continuous-jumper/p/2002-400



Ratings per IEC/EN
Nominal voltage (III/3) 800V
Rated impulse voltage (III / 3) 8kV
Rated current 25A

Physical data
Width 5,7 mm / 0.224 inci
Height 4,1 mm / 0.161 inci
Depth 18,5 mm / 0.726 inci
Jumper assignment 1-2

Material data
Note (material data)
Information on material specifications can be found here
Color gri deschis
Material group I
Insulation material (main housing) Polyamide (PA66)
Flammability class per UL94 V0
Fire load 0,005MJ
Weight 0,7g

Environmental requirements
Environmental Testing (Environmental Conditions)
Test specification
Railway applications –
Rolling stock –
Electronic equipment
DIN EN 50155 (VDE 0115-200):2022-06
Test procedure
Railway applications –
Rolling stock equipment –
Shock and vibration tests
DIN EN 61373 (VDE 0115-0106):2011-04
Spectrum/Installation location Service life test, Category 1, Class A/B
Function test with noise-like vibration Test passed according to Section 8 of the standard
Frequency f= 5 Hz to f= 150 Hz
Acceleration 0.101g (highest test level used for all axes)
Test duration per axis 10 min.
Test directions X, Y and Z axes
Monitoring for contact faults/interruptions Passed
Voltage drop measurement before and after each axis Passed
Simulated service life test through increased levels of noise-like vibration Test passed according to Section 9 of the standard
Frequency f= 5 Hz to f= 150 Hz
Acceleration 0.572g (highest test level used for all axes)
Test duration per axis 5 h
Test directions X, Y and Z axes
Extended test scope: Monitoring for contact faults/interruptions Passed
Extended test scope: Voltage drop measurement before and after each axis Passed
Shock test Test passed according to Section 10 of the standard
Shock form Half sine
Acceleration 5g (highest test level used for all axes)
Shock duration 30 ms
Number of shocks per axis 3 pos. und 3 neg.
Test directions X, Y and Z axes
Extended test scope: Monitoring for contact faults/interruptions Passed
Extended test scope: Voltage drop measurement before and after each axis Passed
Vibration and shock stress for rolling stock equipment Passed
Daca doresti sa iti exprimi parerea despre acest produs poti adauga un review.

Review-ul a fost trimis cu succes.
Trimite

Compara produse

Trebuie sa mai adaugi cel putin un produs pentru a compara produse.

A fost adaugat la favorite!

A fost sters din favorite!